Ways to avoid the paint on the slider

July 17, 2018 BY TRIMS CO.,LIMITED Zippers Knowledge

Zippers can come in a variety of colors, and we usually choose zippers that are similar in color to the fabric. The color of the slider of the Metal Zipper includes bronze, red bronze, white plating, yellow plating, etc. Generally, the color of the metal slider needs to be the same as the color of the teeth of the metal zipper. Plastic Zipper and Nylon Zipper can add a variety of bright colors according to customer needs. Long Zippers manufacturers can add color to Plastic Nylon Zipper surfaces in a number of ways. In general, the more complicated the procedure, the less likely the color Fashion Zipper will fade.

Paint chip-off is a common problem with painted sliders during the use of Plastic Teeth Zipper. Sometimes we find paint chips on the edges or protruding parts of the slider. This will affect the aesthetics of the garment. Here are some suggestions that may help you maintain the life of your painted zipper.

Paint chip-off is a common issue with painted sliders. Normally, painted chip-off can be found at the edge of the sliders or on the protruded part.

1. Thin coatings have very low resistance to physical damage. Therefore, we must protect the zipper slider from direct impact. But for luggage, friction is almost inevitable, and we need to pay particular attention.

2. When washing clothes in a washing machine, a large amount of friction may be generated, which may cause the paint on the slider to peel off. Before washing, make sure that the zipper is fully closed and wrap the sliders with clothing to provide extra protection. For items with painted sliders, it is best to wash by hand.

3. Avoid Direct Contact with the Iron.When the iron comes into direct contact with the painted slider, it will cause paint chip-off. You may cover the zipper with a sheet of paper/cloth to avoid direct ironing. This is actually applicable to both painted sliders and electroplated sliders.