Nail file introduction

September 20, 2018 BY TRIMS CO.,LIMITED Nail Files Knowledge

A nail file is a nail tool used to trim, shape, and polish nails, fake nails, crystal nails, or toenails.

The nail file distinguishes different models according to the unit of Grit. (Grit) represents the number of particles per square inch, which is its density. The more particles, the higher the density, and the larger the model, the nail The larger the file size, the softer it is; the lower the density, the smaller the file size, the rougher the file, and the stronger the sharpness. Nail files are divided into steel files and colored file strips, also known as flower files. The flower file is further divided into a file file and a polishing file, and the file file is further divided into a wood chip file, a sponge file and a glass file.

The use of nail file is as follows:

1. Polish the edges of the nails horizontally from both sides to the middle. Do not let the file surface perpendicular to the tip of the nails, but slightly tilt the sides of the nails below the nails to remove the rough edges of the nails.

2. Trim the cut nails with a steel file or a flower file in the order of the sides and front ends, and trim them into the desired shape.

There are some precautions when using a nail file:

1. Use a steel file or a flower file that has been cut to lengths of nails to be ground in the order of two sides and the front end, and ground to the shape we need.

2. For real nails, do not file back and forth in the same part, because this filed will cause fever, cause damage to the nails or even fall off. The proper back and forth filing of fake nails is not a big deal.

3. Use a file to rub gently on the skin. When you feel that the abrasiveness is rougher than the skin, the abrasiveness of the nail file exceeds the tolerance of the natural nail, which will cause the nail to break or fall off. You should choose a model more Large, softer files trim natural nails.