Eyelet button and five-claw button

April 06, 2018 BY TRIMS CO.,LIMITED Buttons Knowledge

You may have seen many buttons on various clothing in your home, such as Jeans Rivets, Printed Sewing Button, Plastic Buttons, Polyester Shirt Button, etc. Do you know and understand the eyelet buckle and five-claw buckle? Let's learn together.

Corn Eye (Steam Eye) Buttons: Generally also called corn eyes and air eyes, mainly used for clothing, bags, handbags, belts, shoes, packaging and other supplies. The products are generally produced with 62 # copper or 65 # copper, and can also be produced with iron or stainless steel, usually used in conjunction with mesons / gaskets. The surface of the product can be electroplated in different colors, such as green bronze, lak, deep kerat, light kerat, red bronze, etc. We can also process oil injection, silk screen, laser, etc. The styles can be bilateral / pressure, unilateral, oval, heart-shaped, etc.

Eyelet Button Inspection Standard

1. Inspect the metal surface of the corns for scratches, oil stains, and deformation.

2. In the case of electroplated corns, check whether the electroplating color is correct, whether there is mutual adhesion and deplating.

3. Try to play a few tablets with the matching die to see if it can be used normally, whether there is cracking, deformation, etc.

Five-claw clasp (five-prong button): A set of clasps is composed of 4 parts, of which two parts are the same, that is, two small iron rings with claws, which are fixed by the five claws engaging with the other side. Because the claw of the five-prong buckle is short, it is not suitable for too thick locations, but it is relatively light. The general summer or children's clothing or thin bags can be used as fasteners.

Part of the five-claw clasp is difficult to distinguish between the front and back. If you look closely, the inner edge of the front is relatively flat, and the back has a groove, which means that the grooved side must be engaged with the claws to be fixed. This must be noted before installation.

The installation tool of the five-claw buckle can be streamlined. First of all, it does not need to punch punches. The sharp claws can be directly passed from the front to the reverse. The tool used by it can be used with the Snap Button. Only one of them has a recessed tapping tool. After putting the other half on the claw, use the same tool to hit two parts for fixing.

As a professional manufacturer of buttons, in addition to the above types of buttons, BY TRIMS CO.,LIMITED also provide you with various buttons such as Alloy Jeans Button, Metal snap buttons for jacket, Snap button tape for baby clothes, etc. Welcome to consult and purchase.